NSN Glossary - Saitech Inc.

Index

Acquisition Advice Code (AAC)

A code denoting how, as distinguished from where, and under what restrictions an item will be acquired. See DOD 4100.39-M, VOLUME 10, TABLE 58.

Adpec Automatic Data Processing Equipment Identification Code (ADPEC)

A one position identifier code to indicate an item of ADPE or containing ADPE regardless of assigned FSC to provide visibility for compliance with unique manager requirements established for ADPE by Public Law 89-306.

0 – No ADP components
1 – Analog CPUs, ADP Central Processing Units for Computers Analog
2 – Digital CPUs, ADP Central Processing Units for Computers
3 – Hybrid CPUs, ADP Central Processing Units for Computers
4 – ADP Input/Output and Storage Devices Used to Control and Transfer Information to and from a CPU
5 – ADP Accessorial Equipment
6 – Punched Card Equipment
7 – ADP Supplies and Support Equipment
8 – Represents consumable supplies such as paper, empty reels and hubs, tape, certifying and cleaning equipment ADP Components
9 – Embedded ADPE that meets one or more of the definitions for codes 1 through 6

Applicability Key

A three position alphanumeric code that indicates whether a requirement in a Federal Item Identification Guide (FIIG) needs to be satisfied for the item being identified.

Commercial and Government Entity Code (CAGE)

A five position alphanumeric code assigned to companies which either fabricate items of production and/or have design control of items procured by the federal government. The second, third, and fourth positions maybe any mixture of alphanumeric, excluding alpha I and O. If the cage is NATO (NCAGE) then it is a five position alphanumeric code with an alpha character in the first and/or last position. The NCAGE prefix and suffix alpha character(s) designates a specific country or codification bureau (see FLIS PROCEDURES MANUAL, VOLUME 10, TABLE 13).

Criticality Code (CC)

A code which indicates that an item is technically critical by reason of tolerance, fit restrictions, application, nuclear hardness properties or other characteristics which affects identification of the item.

C – The item has critical features such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input).
E – The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part (ACSI/FSCAP) and is specially designed to be or selected as being nuclear hard.
F – The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part (ACSI/FSCAP).
H – The item is specifically designed to be or selected as being nuclear hard (i.e., it will continue to perform its designed function in an environment created by a nuclear explosion). The item does not have other critical features.
M – The item is specifically designed to be or selected as being nuclear hard. In addition the item has other critical features such as tolerance, fit restrictions or application.
N – The item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input).
S – The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel.
V – The item has not been reviewed for FSCAP, CSI or CAI purposes by an approved engineering authority.
X – The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Y – The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.

Controlled Inventory Item Code (CIIC)

A one position alphanumeric code that indicates the security classification and/or security risk or pilferage controls for storage and transportation of department of defense (DOD) assets. In accordance with NAVSUP P-485, VOLUME II, APPENDIX 9, PART D; DA PAM 708-2, TABLE 3-9; AND DOD 4100.39-M, VOLUME 10, TABLE 61.

1 – Highest Sensitivity (SRC-I) – Unclassified AA&E. Non-nuclear missiles, recoilless rifles and rockets in a ready-to-fire (certified round) configuration. Examples: (e.g., patriot missile launch canister, FIM-92 stinger, M47 Dragon, Javelin, M72 Law, M136 AT4 LAAW, M141 BDM) and explosive rounds for non-nuclear missiles and rockets. This SRC also applies in situations where the launcher tubes and explosive rounds, though not in a ready-to-fire configuration, are jointly stored or transported.
2 – High Sensitivity (SRC II) – Unclassified AA&E.
3 – Moderate Sensitivity (SRC III) – Unclassified AA&E.
4 – Low Sensitivity (SRC IV) – Unclassified AA&E.
5 – Highest Sensitivity (SRC I) – Secret AA&E.
6 – Highest Sensitivity (SRC I) – Confidential AA&E.
7 – Non-sensitive (SRC-N/A) – Unclassified AA&E: or items assigned a demilitarization code other than A, B, Q, or P for which another CIIC is inappropriate. (Note: the loss, theft, unlawful disposition, and/or recovery of an item with CIIC 7 will be investigated in accordance with DOD-4000-25-2-M and DOD 7200.14-R, VOLUME 12, CHAPTER 7).
8 – High Sensitivity (SCR) – confidential AA&E
9 – This code identifies an item as a controlled cryptographic item (CCI). CCI is described as secure telecommunications or information handling equipment, associated cryptographic component, or other hardware item which performs a critical COMSEC function. Items so designated are unclassified but controlled, and will bear the designation “controlled cryptographic item or CCI.”
A – Confidential – Formerly Restricted Data
B – Confidential – Restricted Data
C – Confidential or Moderate Sensitivity (SRC III) and Low Sensitivity (SRC IV) – Confidential AA&E. (item will be stored and transported in accordance with the provisions of DOD 5100.76M or DOD 5200.1R information security program – whichever is more stringent).
D – Confidential – Cryptologic
E – Secret – Cryptologic
F – Top Secret – Cryptologic
G – Secret – Formerly Restricted Data
H – Secret – Restricted Data
I – Aircraft Engine Equipment and Parts
J – Pilferage – pilferage controls may be designated by the coding activity to items coded U (Unclassified) by recording the item to J.
K – Top Secret – Formerly Restricted Data
L – Top Secret – Restricted Data
M – Hand-tools and Shop Equipment
N – Firearms Piece Parts and Nonlethal Firearms
O – Item contains naval nuclear propulsion information; disposal and access limitations are identified in NAVSEAINST C5511.32. Also, indentifies unclassified nuclear weapons-related materiel (NWRM) requiring stringent positive inventory control in accordance with AFMAN 23-110. Caution: store and handle in a manner that will prevent unauthorized access to this material.
P – Ammunition and Explosives
Q – A drug or other controlled substance designated as a schedule III, IV, or V item, in accordance with the controlled substance act of 1970. Other sensitive items requiring limited access storage.
R – Precious metals, a drug or other controlled substance designated as a schedule I or II item, in accordance with the controlled substance act of 1970. Other selected sensitive items requiring storage in a vault or safe.
S – Secret
T – Top Secret
U – Unclassified
V – Individual Clothing and Equipment
W – Office Machines
X – Photographic Equipment and Supplies
Y – Communication/Electronic Equipment and Parts
Z – Vehicular Equipment and Parts

Concept Number

A one position numeric code that is used to differentiate how a particular item name should be used.

Condition Code

A one position numeric code that denotes the restrictions for classifying Approved Item Names (AIN).

Cage Status Code

A one position alpha code that identifies the status condition of a Commercial And Government Entity (CAGE) code. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 19.

A – Active. Company currently in operation. Applicability CAGE/NCAGE.
C – Restraint. Use the cage code indicated. (Do not use for cataloging purposes.) Applicability CAGE/NCAGE.
E – Debarred. The company entity shown is debarred, suspended or proposed for debarment as indicated on the GSA list of parties excluded from procurement programs. Note: at the time the company/entity s eligibility is reinstated, the status code of “E” will be changed back to “A” (Active Status).
F – Obsolete. Location of company unknown. Reference numbers currently recorded in the Federal/NATO Supply System. Applicability CAGE/NCAGE.
H – Obsolete. Company has been discontinued and/or CAGE/NCAGE no longer required. Reference numbers currently recorded in the federal/NATO supply system. Applicability CAGE/NCAGE.
J – Specialized use. Active specialized use record. Denotes the item of production recorded in the federal/NATO supply system is designed to certain industry wide specification(s) standard(s). Applicability CAGE/NCAGE.
K – Specialized use. Active specialized use record denoting the item is produced or meets government designed specification/standard. Applicability CAGE/NCAGE.
M – Specialized use. Active specialized use record. CAGE/NCAGE is referenced to a special numbering system developed by the government and used in conjunction with the identification of cataloging data in the federal/NATO supply system. Applicability CAGE/NCAGE
N – Cancelled. Cancelled without replacement record. Company is defunct and/or CAGE/NCAGE is no longer required. No reference numbers recorded in the federal/NATO supply system. Applicability CAGE/NCAGE.
P – Cancelled. Cancelled without replacement record. Location of company is unknown. No reference numbers recorded in the federal/NATO supply system. Applicability CAGE/NCAGE.
R – Cancelled. Cancelled with replacement record. Company discontinued and/or acquired/merged within successor. Applicability CAGE/NCAGE.
T – Specialized use. Active specialized use record. Joint venture. Company is a 50/50 partnership. Applicability cage.
U – Restraint. Active record with restraint. Manufacturer s representative. Code is assigned to an organization that represents other various companies for various reasons. The company being represented will usually have their own specific cage code assigned. (Do not use for cataloging purposes.). Applicability cage (type f only).
W – Restraint. Active record with restraint. Cage code assigned to an individual employed by a company where that individual performs contracted work using company name separate from the company location. Address on this record will be different than the address of the company itself. (Do not use for cataloging purposes.)
Y – Active specialized use record. CAGE/NCAGE assigned to an entity still actively engaged in business operations: however, the entity no longer wishes to be considered for contracting or sells its products only through distributors. (Do not use for procurement purposes).

Document Availability Code (DAC)

A one position alphanumeric code, which establishes the type and availability of technical documentation. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 5.

1 – The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
2 – The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
3 – The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
4 – The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
5 – The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
6 – The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
9 – The reference number is of the type for which an indication of document availability is not required.
A – The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
B – The reference number is represented by an engineering drawing. The drawing is available for limited use under the terms of the rights-in-data clause of the contract by which the data was obtained and will be furnished by the activity identified by the RNAAC upon request. Descriptive data based on limited rights information will not be released to the general public through publications or other media.
C – The reference number is represented by an engineering drawing. The drawing is available for unlimited use but under the security measures specified for the level of security classification assigned. The drawing will be furnished only to qualified requesters by the activity identified by the RNAAC.
D – The reference number is represented by an engineering drawing. The drawing is available for limited use under the terms of the rights-in-data clause of the contract by which the data was obtained, and under the security measures specified for the level of security classification assigned. The drawing will be furnished only to qualified requesters by the activity identified by the RNAAC. Descriptive data based on limited rights information will not be released to the general public through publications or other media.
E – The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
F – The reference number is represented by engineering data other than an engineering drawing. The data is available for limited use under the terms of the rights-in-data clause of the contract by which the data was obtained and will be furnished by the activity identified by the RNAAC upon request. Descriptive data based on limited rights information will not be released to the general public through publications or other media.
G – The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use but under the security measures specified for the level of security classification assigned. The data will be furnished only to qualified requesters by the activity identified by the RNAAC.
H – The reference number is represented by engineering data other than an engineering drawing. The data is available for limited use under the terms of the rights-in-data clause of the contract by which the data was obtained, and under the security measures specified for the level of security classification assigned. The data will be furnished only to qualified requesters by the activity identified by the RNAAC. Descriptive data based on limited rights information will not be released to the general public through publications or other media.
U – A reference number represented by a bar code structure in accordance with an organization such as Global Standards 1 (GS1). The technical documentation may or may not be available to the RNAAC. Note: GS1 is the organization formed as a result of the merger between the Uniform Code Council (UCC) and EAN International.
X – DAC not known. Found on U.S. NSNs that were assigned before 1975. Cannot be used for new item assignment, or any maintenance action on older NSNs.

Demilitarization Code (DML)

A one position alpha code that identifies items requiring demilitarization and the type of demilitarization required. In accordance with DA PAM 708-2, TABLE 3-12; DOD 4100.39-M, VOLUME 10, TABLE 38 and DOD 4160.21-M-1

A – Non-USML/non-CCLI – no DEMIL or DOD TSC required. Department of commerce may impose licensing requirements to certain destinations. (NOTE 9).
B – USML Items – Mutilation to the point of scrap required worldwide. (NOTE 7).
C – USML Items – DEMIL required. Remove and demilitarize installed key point(s). (NOTE 4).
D – USML Items – DEMIL required. Destroy item and components to prevent restoration or repair to a usable condition. (NOTE 5).
E – DOD Demilitarization Program Office (DDPO) reserves this code for their exclusive-use only. DEMIL instructions will be furnished by the DDPO (NOTE 6).
F – USML Items – DEMIL required. Item/technical managers or equipment/product specialists will furnish special DEMIL instructions. (NOTE 3).
G – U.S. Munitions List (USML) items – DEMIL required – Ammunition and Explosives (AE). This code applies to both unclassified and classified AE items. (NOTE 1).
P – USML Items – DEMIL required. Security Classified Items. (NOTE 2).
Q – Commerce Control List Items (CCLI) – Mutilation to the point of scrap required outside the United States. In the United States, mutilation requirement determined by the DEMIL integrity code. DOD trade security controls (TSC) required in the United States. (NOTE 8).

Environmental Attribute Code (ENAC)

A two position alphanumeric code that identifies items with environmentally preferred characteristics. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 194.

AB – Bronze – EPEAT registered products
AF – Silver – EPEAT registered products
AG – Gold – EPEAT registered products
AK – Non-cadmium product
AT – 2-cycle engine oils
AU – Composite panels – acoustical
AV – Adhesive and mastic removers
AW – Disposable containers
AY – Dust supressants
AZ – Firearms lubricants
BA – Floor strippers
BB – Fluid-filled transformers – synthetic ester-based
BC – Fluid-filled transformers – vegetable oil-based
BD – Greases – food grade
BE – Laundry products – general purpose
BF – Glass cleaners
BG – Graffiti and grease removers
BH – Greases – general
BJ – Hand cleaners
BK – Hand sanitizers
BL – Composite panels – interior panels
BM – Lip care products
BN – Wood and concrete sealers – membrane concrete sealers
BP – Greases – multi-purpose
BQ – Films – non-durable
BR – Plastic insulating foam for residential and commercial construction
BS – Composite panels – plastic lumber
BT – Laundry products – pre-treatment/spot removers
BU – Greases – rail track
BV – Films – semi-durable films
BW – Sorbents
BX – Hydraulic fluids – stationary equipment
BY – Composite panels – structural interior panels
BZ – Composite panels – structural wall panels
CA – Greases – truck
CB – Wood and concrete sealers – penetrating liquids
CE – Carpets
CF – Bathroom and spa cleaners
CG – Carpet and upholstery cleaners – general purpose
CH – Carpet and upholstery cleaners – spot removers
CJ – Concrete and asphalt release fluids
CK – De-Icers – general purpose
CL – Fertilizers
CM – Metal working fluids – general purpose soluble, semi-synthetic oils
CN – Metalworking fluids – high performance soluble, semi-synthetic and synthetic oils
CP – Metalworking fluids – straight oils
CR – Beverage vending machines
CS – Battery chargers
CT – Room air cleaners
CU – Programmable thermostats
CV – Battery charging systems
CW – Digital-to-analog converter boxes (DTAS)
CX – External power adapters
CY – Set-top boxes
CZ – Digital duplicators
DB – Notebook computers/tablet PCs
DC – Light fixtures
DD – Decorative light strings
DE – Commercial dishwashers
DF – Led lighting
DG – Battery charging systems
DJ – Gas condensing
DK – Heat pump
DL – High-efficiency gas storage
DM – Whole-home gas tankless
DN – Pre-rinse spray valves
DP – Flowable fill
DQ – Modular threshold ramps
DR – Non-pressure pipe
DS – Solar
DT – Railroad grade crossing surfaces
DU – Roofing materials
DV – Compost and fertilizer made from organic materials
DW – Office furniture
DX – Bike racks
DY – Blasting grit
DZ – Windows, doors & skylights
E1 – Office recycling containers
E2 – Office waste receptacles
E3 – Plastic desktop accessories
E4 – Toner cartridges
E5 – Binders, clipboards, file folders, clip portfolios and presentation folders
E6 – Printer ribbons
E7 – Plastic trash bags
E8 – Plastic envelopes
E9 – Pallets
EB – Re-refined lubricating oils
EC – Roof products
ED – Retread tires
EE – Engine coolants
EF – Building insulation products
EH – Cement and concrete containing coal fly ash
EJ – Cement and concrete containing ground granulated blast furnace slag
EK – Structural fiberboard
EL – Laminated paperboard
EM – Carpet
EN – Floor tiles
EP – Patio blocks
EQ – Consolidated and reprocessed latex paint
ER – Traffic barricades
ES – Traffic cones
ET – Parking stops
EU – Channelizers
EV – Delineators
EW – Flexible delineators
EX – Playground surfaces
EY – Running tracks
EZ – Plastic fencing
F1 – DVD players
F9 – Microwave ovens
FA – Garden and soaker hoses
FB – Lawn and garden edging
FC – Ice machines
FD – Shower and restroom dividers/partitions
FE – Hydraulic mulch
FG – Room air conditioners
FH – Dishwashers
FJ – Refrigerators
FK – Central air conditioners
FL – Gas furnaces
FM – Electric water heaters
FN – Gas water heaters
FP – Air source heat pumps
FQ – Geothermal heat pumps
FR – Faucets
FS – Showerheads
FU – Commercial solid door refrigerators & freezers
FV – Urinals
FW – Computers
FX – Monitors
FY – Printers
FZ – Copiers
G1 – Cement and concrete containing cenospheres
G2 – Cement and concrete containing silica fume
G3 – Integrated computers
G4 – Rebuilt vehicular parts
G6 – Freezers
G8 – Light commercial heating and cooling
GA – Facsimile machines
GC – Commercial ice machines
GD – Exit signs
GE – Fluorescent tube lamps
GF – Fluorescent ballasts
GG – Residential windows
GH – Electric motors
GJ – Distribution transformers medium
GK – Clothes washers
GL – Commercial unitary air conditioners
GM – Commercial heat pumps
GN – Fluorescent luminaries
GP – Roof products
GQ – Household consumer products
GR – Architectural coatings
GT – Carpet cushion
GU – Plastic lumber landscaping timber and posts
GV – Park benches and picnic tables
GW – Awards and plaques
GX – Industrial drums
GY – Mats
GZ – Signage
H1 – Audio products
HA – Sorbents
HB – Manual-grade strapping
HC – Playground equipment
HD – Commercial hot food holding cabinets
HE – Commercial fryers
HF – Boilers
HG – Furnaces
HH – Centrifugal pumping system
HJ – Industrial hid luminaries
HK – Downlight luminaries
HL – Compact fluorescent lamps
HM – Lighting controls
HN – Clothes washers
HP – Water based cleaning materials
HR – Desktop computers
HS – Laptop computers
HT – Computer monitors
HU – Printers
HV – Facsimile machines
HW – Copier
HX – TV
HY – VCR
HZ – TV/VCR/DVD combo
J3 – Dehumidifiers
J4 – Ceiling fans
J6 – Home sealing (insulation)
J7 – Ventilating fans
J8 – Cordless phones
JC – Marine operations coatings
JD – Aerospace operations coatings
JE – Metal parts coatings
JF – Commercial/industrial sanitary tissue products
JG – Asbestos alternative products
JH – Miscellaneous papers
JJ – Newsprint
JK – Paperboard and packaging products
JL – Printing and writing papers
JM – Griddles
JN – Fryers
JP – Hot food holding cabinets
JQ – Commercial steam cookers
JR – Refrigerators and freezers
JS – Air-cooled chillers
JT – Ground source heat pumps
JU – Water-cooled chillers
JV – Ground source heat pumps
JW – Workstation
JX – Docking station
JY – Multifunction devices
JZ – Scanner
K1 – Feeding tubes
K2 – Fixatives, stains, reagents, preservatives
K3 – Dental amalgam
K4 – Float switches
K5 – Electrical switches
K6 – Thermometers
K7 – Pressure gauges
K8 – Barometers
K9 – Flow meters
KB – Mailing machines
KE – Vending machines
KG – Combination units
KH – DVD products
KJ – Home audio
KK – Televisions
KP – Water coolers
KQ – Mobile equipment hydraulic fluids
KR – Penetrating lubricants
KS – Diesel fuel additives
KT – Roof coatings
KU – Bedding, bed linens, and towels
KV – Water tank coatings
KW – Thermometers
KX – Sphygmomanometers
KY – Esophageal dilators
KZ – Cantor tubes and miller ABBOTT tubes
LA – Passenger motor vehicles
LB – Engine electrical system components, non aircraft
LC – Disposable cutlery
LE – Air-source heat pumps
LF – Computers
LG – Monitors
LH – Printers, scanners, and all-in-ones
LJ – Copiers and fax machines
LK – Refrigerators and freezers
LL – Dishwashers
LM – Room ac
LN – Boilers
LP – Central ac
LQ – Light bulbs (CFLS)
NR – Reviewed – does not meet some ENAC criteria
ZZ – Multiple entry

Electrostatic Discharge Code (ESDC)

A one position alpha code that indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. Electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. Electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 189.

A – No known electrostatic discharge (ESD) or electromagnetic interference (EMI) sensitivity.
B – Represents items with ESD sensitivity.
C – Represents items with EMI sensitivity.
D – Represents items with both ESD and EMI sensitivity.

Federal Item Identification Guide (FIIG): A six position alphanumeric code in the Master Requirement Directory recorded against a Master Requirement Code (MRC) which identifies the FIIG in which the MRC will be used.
Federal Supply Classification (FSC): A four position numeric code which identifies the supply classification of an item of supply identified under the federal cataloging program, an item of production and/or a homogeneous area of commodities in respect to their physical or performance characteristics. The first two digits identify the federal supply group and the last two digits identify the specific class within the specified group. The combination of these four digits constitutes the federal supply classification.

Hazardous Characteristics Code (HCC)

A two position alphanumeric code used for storage purposes of hazardous items. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 214.

A1 – Radioactive, licensed
A2 – Radioactive, license exempt
A3 – Radioactive, license exempt, authorized
B1 – Alkali, corrosive, inorganic
B2 – Alkali, corrosive, organic
B3 – Alkali, low risk
C1 – Acid, corrosive, inorganic
C2 – Acid, corrosive, organic
C3 – Acid, low risk
C4 – Acid, corrosive and oxidizer, inorganic
C5 – Acid, corrosive and oxidizer, organic
D1 – Oxidizer
D2 – Oxidizer and poison
D3 – Oxidizer and corrosive, acidic
D4 – Oxidizer and corrosive, alkali
E1 – Explosive, military
E2 – Explosive, low risk
F1 – Flammable liquid, dot packing group I, OSHA IA
F2 – Flammable liquid, dot packing group II, OSHA IB
F3 – Flammable liquid, dot packing group III, OSHA IC
F4 – Flammable liquid, dot packing group III, OSHA II
F5 – Flammable liquid and poison
F6 – Flammable liquid and corrosive, acidic
F7 – Flammable liquid and corrosive, alkali
F8 – Flammable solid
G1 – Gas, poison (nonflammable)
G2 – Gas, flammable
G3 – Gas, nonflammable
G4 – Gas, nonflammable, oxidizer
G5 – Gas, nonflammable, corrosive
G6 – Gas, poison, corrosive (nonflammable)
G7 – Gas, poison, oxidizer (nonflammable)
G8 – Gas, poison, flammable
G9 – Gas, poison, corrosive, oxidizer (nonflammable)
H1 – Hazard characteristics not yet determined
K1 – Infectious substance
K2 – Cytotoxic drugs
M1 – Magnetized material
N1 – Not regulated as hazardous
P1 – Peroxide, organic, dot regulated
P2 – Peroxide, organic, low risk
R1 – Reactive chemical, flammable
R2 – Water reactive chemical
T1 – Dot poison – inhalation hazard
T2 – Un-poison, packing group I
T3 – Un-poison, packing group II
T4 – Un-poison, packing group III
T5 – Pesticide, low risk
T6 – Health hazard
T7 – Carcinogen (OSHA, NTP, IARC)
V1 – Miscellaneous hazardous materials – class 9
V2 – Aerosol, nonflammable
V3 – Aerosol, flammable
V4 – Dot combustible liquid, OSHA IIIA
V5 – High flash point materials, OSHA IIIB
V6 – Petroleum products
V7 – Environmental hazard
X1 – Multiple hazards under one NSN
Z1 – Article containing asbestos
Z2 – Article containing mercury
Z3 – Article containing polychlorinated biphenyl (PCB)
Z4 – Article, battery, lead acid, non-spilllable
Z5 – Article, battery, nickel cadmium, non-spillable
Z6 – Article, battery, lithium
Z7 – Article, battery, dry cell

Hazardous Material Indicator Code (HMIC)

A one position alpha code that identifies a hazardous item. Requires the procuring activity to acquire a material safety data sheet (MSDS). In accordance with DOD 4100.39-M, VOLUME 10, TABLE 179.

D – Indicates there is no information in the HMIRS; however, the NSN is in a FSC in table I of Federal Standard 313 and a MSDS should be available to the user.
N – Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
P – Indicates there is no information in the HMIRS. The NSN is in a FSC in table II of FED STD 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of item.
Y – Indicates information is in the hazardous materials information resource system (HMIRS).

Integrated Materiel Manager (IMM)

A two position alphanumeric code that indicates the materiel manager responsible for the execution of assigned materiel management functions for selected items or selected federal supply classes.

Item Name Code (INC)

A five position numeric code that is assigned to each approved item name. Non-approved item names are assigned item name code 77777. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 20.

Item Standardization Code (ISC)

A one position alphanumeric code, which represents the item standardization decision. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 91.

0 – Items under the specification control of defense threat reduction agency (DTRA) or National Security Agency (NSA).
1 – An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a CODE 1 item is related to a CODE 2 item.
2 – An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a CODE 2 item is related to a CODE 1 item.
3 – An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
5 – An item authorized for procurement that has not yet been subject to item standardization.
6 – An item authorized for procurement that is in a specific federal supply class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
7 – Nato Use Only
8 – Nato Use Only
B – A new item authorized for procurement, contained in a new or revised superseding specification or standard that replaces prior items.
C – An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
E – An item no longer authorized for procurement which has been replaced by an item contained in a new or revised superseding specification or standard.

Item Name

A thirty-two position alphanumeric or special character name, which establishes a basic concept of the item of supply to which the item belongs. It may be a basic noun or noun-phrase, followed by those modifiers necessary to differentiate between item concepts for items having the same basic noun.

Management Control Codes (MCC)

A seven position alphanumeric group of management codes used and configured by the individual military services to designate controls which are essential to the successful operation of a particular system. All positions may not be used and each element remains in its pre-selected position. Blank spaces are filled with dashes. AIR FORCE positions: 1-2-fund code, 3-budget code, 4-5-materiel management aggregation code, 6-blank, 7-price validation code. In accordance with DOD 4100.39-M, VOLUME 10, TABLES 66-68, 177. ARMY positions: 1-materiel category and inventory manager, 2-appropriation and budget activity account code, 3-management inventory segment, 4-5-specific group/generic category code, 6-army accounting requirements code, 7-blank. In accordance with DA PAM 708-2, TABLES 3-1, 3-24-28 and DOD 4100.39-M, VOLUME 10, TABLES 64-65. COAST GUARD positions: 1-inventory account code, 2-blank, 3-serial number control code, 4-special material icontent code, 5-7-blank. In accordance with DOD 4100.39-M, VOLUME 10, TABLES 102,127, 150. MARINE CORPS positions: 1-stores account code, 2-combat essentiality code, 3-4-management code/echelon code, 5-material identification code, 6-operational test code, 7-physical category code. In accordance with DOD 4100.39-M, VOLUME 10, TABLES 54-55, 72-73, 123-124. NAVY positions: 1-2-cognizance code, 3-4-special material identification code, 5-6-issue, repair, requisition restriction code, 7-special material content code. In accordance with NAVSUP P-485, VOLUME II, APPENDIX 9, PARTS G, V, APPENDIX 14, APPENDIX 18, PART B AND DOD 4100.39-M, VOLUME 10, TABLES 60,62,95, 102.

Material Management Aggregation Code (MMAC)

A two position alpha code that identifies an item of supply to be managed by a specific activity manager. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 66.

Major Organizational Entity Code (MOE (or S_A))

A two position alphanumeric code that represents the subdivision of a US Governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 51.

AA – Office of The Secretary of Agriculture
BA – Office of The Secretary of Labor
CA – National Oceanographic and Atmospheric Administration
CB – Bureau of The Census
CM – Maritime Administration
CS – National Bureau of Standards
DA – Department of The Army
DF – Department of The Air Force
DG – National Security Agency
DH – Defense Threat Reduction Agency
DJ – HQ United States Special Operations Forces Command (USSOCOM)
DK – Joint Strike Fighter Program
DL – Defense Intelligence Agency
DM – U.S. Marine Corps
DN – Department of the NAVY
DP – National Imaging and Mapping Agency
DR – Defense Logistics Agency
DS – Defense Logistics Agency
DZ – DOD Dependent Schools (DODDS)
EC – Interstate Commerce Commission
EF – Office of Economic Opportunity
EX – Central Intelligence Agency
FC – Bureau of Prisons
FD – Federal Bureau of Investigation
FF – Office of The Attorney General
GE – Federal Aviation Administration
GG – Office of The Secretary of Transportation
GH – Federal Railroad Administration
GP – U.S. Coast Guard
HD – Food and Drug Administration
HH – Office of The Secretary of Hew
HJ – National Institutes of Health
HK – Health Services Administration
HS – Social Security Administration
IB – Kenya
IC – Jordan
ID – Venezuela
KA – Learjet
KF – U.S. Fish and Wildlife Service
KG – Geological Survey
KJ – Bureau of Indian Affairs
KK – Office of The Secretary of Interior
KL – Bureau of Land Management
KM – Bureau of Mines
KP – National Park Service
KR – Bureau of Reclamation
KX – Bonneville Power Administration
KY – Southeastern Power Administration
KZ – Southwestern Power Administration
LM – Library of Congress
LP – Government Printing Office
MM – Office of The Secretary of Housing & Urban Development
O2 – Mali
O3 – Somalia
O4 – Tunisia
O5 – Congo, the Democratic Rep. of
O6 – Haiti
O7 – Panama
O8 – Ghana
OD – Colombia
OE – Honduras
OF – El Salvador
OG – Trinidad-Tobago
OH – Surinam
OJ – Paraguay
OK – Uruguay
OL – Peru
OM – Ecuador
ON – Guatemala
OP – Dominican republic
OQ – Nicaragua
OR – Bolivia
OS – Costa Rica
OT – Lebanon
OV – Qatar
OW – Bahrain
OY – Myanmar
OZ – Cameroon
QE – Bureau of Engraving and Printing
QH – Bureau of Accounts
QM – Bureau of The Mint
QN – Internal Revenue Service
QU – Office of The Treasurer of The United States
RA – National Weather Service
SA – Bureau of Administration Department of State
T1 – National Aeronautics and Space Administration
T8 – Panama Canal Company
TD – Department of Energy
TG – General Services Administration
TJ – District of Columbia Government
TV – Tennessee Valley Authority
U2 – Committee on Purchase of Blind-Made Products
UE – Smithsonian Institution
UL – U.S. Information
VA – Veterans Administration
VB – Bosnia and Herzegovina
VD – Latvia
VE – Oman
VK – Sweden
VQ – Iraq
VS – Serbia
WA – United Nations
WB – Austria
WD – Croatia
WE – Estonia
WF – Finland
WG – United Arab Emirates
WH – Hungary
WI – Lithuania
WJ – Fiji
WL – Slovenia
WM – Macedonia
WN – NADB (NATO Ammunition Data Base)
WP – Poland
WR – Romania
WS – Slovakia
WT – Tonga
WU – Bulgaria
WW – Environmental Protection Agency
WX – NATO Maintenance and Supply Agency (NAMSA) for NATO MCRL Data
WZ – Czech Republic
XF – U.S. Postal Service – Procurement and Supplies Department
YA – Brazil
YB – Spain
YD – Israel
YE – Taiwan, Province of China
YF – Argentina
YG – Papua New Guinea
YH – Albania
YJ – Singapore
YK – Kuwait
YL – Switzerland
YM – Sudan
YN – Chile
YP – Morocco
YQ – Egypt
YR – Ukraine
YS – Saudi Arabia
YT – Indonesia
YU – Russia
YV – Peoples Republic of China
YW – Malaysia
YX – Mexico
YY – Thailand
ZA – Australia
ZB – Belgium
ZC – Canada
ZD – South Africa
ZE – New Zealand
ZF – France
ZG – Germany
ZH – Republic of Korea
ZI – India
ZJ – Japan
ZK – United Kingdom
ZL – Luxembourg
ZM – Philippines
ZN – Netherlands
ZO – Pakistan
ZP – Portugal
ZR – Italy
ZS – Denmark
ZT – Norway
ZU – Greece
ZV – Iceland
ZW – Turkey
ZX – NATO Maintenance and Supply Agency
ZZ – United States of America

Master Requirement Code (MRC)

A four position alpha code assigned to each physical or performance characteristics requirement in a Federal Item Identification Guide (FIIG).

Material Safety Data Sheet (MSDS)

A five position alpha code that is assigned to an MSDS within Hazardous Materials Information Resource (HMIRS). For more information please navigate to the defense logistics information services HMIRS home page using the link below.

National Item Identification Number (NIIN): A nine position numeric number assigned to each approved item identification. The first two positions are the national codification bureau (NCB) code, followed by a seven position non-significant number.
National Stock Number (NSN): A 13-digit numeric code, identifying all the ‘standardized material items of supply’ as they have been recognized by all NATO countries including United States Department of Defense (DOD). Pursuant to the NATO Standardization Agreements, the NSN has come to be used in all treaty countries, where it is also known as a NATO Stock Number. A two-digit Material Management Aggregation Code (MMAC) suffix may also be appended, to denote asset end use but it is not considered part of the NSN. NSN structure: 4 digit FSC (first 2 digit are Federal Stock Group or FSG) – 9 digit NIIN (first 2 digits are the national codification bureau, NCB, code and 7 digit item number)

Order of USE (OOU): A code denoting a national stock number’s I&S relationship within a service/agency’s I&S family. The first two positions indicate the I&S order of use subgroup code, and the last position indicates the order of use sequence code within subgroups.

Precious Metals Indicator Code (PMIC)

A one position alpha code, which identifies items that have precious metals as part of their content. Precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity. The precious metals recovery program for the federal government encompasses Gold, Silver, Platinum, and the Platinum family which consists of Palladium, Iridium, Rhodium, Osmium, and Ruthenium. In accordance with DA PAM 708-2, TABLE 3-32 and DOD 4100.39-M, VOLUME 10, TABLE 160.

A – Item does not contain Precious Metal.
C – Item contains combination of two or more Precious Metals (Silver, Gold, Platinum).
G – Item contains Gold.
P – Item contains Platinum family metals.
S – Item contains Silver.
U – Precious Metal content is unknown.
V – Precious Metal type varies between manufacturers.

Quantity Unit Pack (QUP)

A code indicating the number of units of issue in the unit package as established by the managing activity.

0 – No QUP
1 – 1
2 – 2
3 – 3
4 – 4
5 – 5
6 – 6
7 – 7
8 – 8
9 – 9
A – 10
B – 12
C – 15
D – 16
E – 18
F – 20
G – 24
H – 25
J – 32
K – 36
L – 48
M – 50
N – 72
P – 75
Q – 100
R – 120
S – 144
T – 200
U – 250
V – 500
W – 1000
X – BLK
Y – Packager’s option so long as all other contractual requirements are met.
Z – Special Requirements

Requirements Statement

A one-hundred ten position clear text field which gives the requirement statement in straight forward sequence for an assigned Master Requirement Code (MRC).

Reference Number Category Code (RNCC)

A one position alphanumeric code that designates the relationship of the reference number to the item of supply. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 6.

1 – Secondary reference. Any additional number, other than a primary number (Codes 1, 2, 3, 4), informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4, or 7 but has since been replaced in the item-of-supply concept of the nsn by another primary number. Includes additional numbers assigned by the design control organization; superseded or discontinued reference numbers which may have resulted from: a manufacturer s change in numbering system; the manufacturer no longer produces the item or is no longer a technically approved source; the manufacturer or supplier for that number is out of business. Note: an RNCC 5 reference with a reference number variation code (RNVC) of 2 shall not be added to an nsn with a standard military drawing (SMD) or military specification coded RNCC-RNVC 2-2 unless the reference is registered on the qualified products list (QPL) for the SMD or mil spec. (Obsolete, superseded, cancelled, or discontinued reference numbers coded RNCC 5 shall be coded reference number variation code 9. All secondary reference extra long reference number (ELRNS), whether current, (obsolete, superseded, cancelled, or discontinued, shall be coded RNCC 5 and RNVC 1.)
2 – Definitive government specification or standard designator reference. A part number, style number, or type designator included in or developed in accordance with a government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of supply. These reference numbers may be coded with reference number variation code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.N.(4). (Non-definitive government specifications or standard designator references shall be coded 4; vendor item drawings as defined in ASMEY-14.24M and ASMEY-14.100M shall be coded 7; professional association or standard designator references shall be coded 3.)
3 – Design control reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements. (When used to identify a reference number where the design control reference is no longer active (original design activity), the reference number will be coded with reference number variation code (RNVC)9).
4 – Non-definitive U.S. Government specification or standard reference. Any government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1. (Includes the specification number of those specifications for which type designation is used as code 2. Excludes professional association, industrial association, or manufacturer s specification or standard reference which shall be coded 3, and vendor item drawing as defined in ASMEY-14.24M and ASMEY-14.100M which shall be coded 7.)
5 – Source control reference. The number assigned by a design control manufacturer of an end item of equipment, including a government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for source control drawing in ASMEY-14.24M and ASMEY-14.100M. (Applicable only to type 1, 1B, 2, 4, and 4B item identifications.)
6 – Information reference. North Atlantic Treaty Organization (NATO) stock numbers (CAGE CODE INTE9), production equipment codes (CAGE CODE 99998), and DOD ammunition codes (CAGE CODE 99999) which may be related to NSNs. (Reference numbers for the cage codes cited above shall be coded RNVC 9.) Within NATO, the definition means the following: information reference any related to the nsn which does not fall into any other category.
7 – Vendor item drawing reference (formerly specification control reference). The number assigned by a design activity to a drawing that is not item identifying, but which delineates existing commercial or vendor developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition of vendor item drawing in MIL-STD-100. Vendor item drawing references are administrative control numbers and shall not be used as part identification numbers.
8 – US/NATO-reproduced item identification number. A number representing a reproduction of an item of production by a NATO country (including the united states) for which authorization to use the NATO/National Stock Number has been granted by the originating country. The reproduced item represents the same item of production as the original item.
A – Design category packaging and related logistics data reference number. The number of a document representing packaging and related logistics data requirements.
C – Advisory reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the nsn has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is no direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCCC shall be used only in conjunction with RNVC 1.)
D – Drawing number reference. A number assigned by a design activity to a drawing or other technical documentation which identifies a drawing/document that is related to an item of supply or production but does not qualify for assignment of codes 1, 3, 5, 7, or C. Code D reference numbers will not be used in item-of-supply determinations.
E – Replaced reference number. A manufacturer’s part number, Government Specification/Standard or other design control reference number that is superseded, discontinued or replaced resulting from a cancel-use action on a NSN which was recorded with ISC 3 or E. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purpose.

Reference Number Variation Code (RNVC)

A one position numeric code that indicates if the reference number is or is not item identifying, or is for information only. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 7.

1 – A design control reference or other reference number that does not identify an item of production without the use of additional information, or is a specification, part, type or similar reference number that does not identify an item of supply without the use of additional information.
2 – A design control reference or other reference number that is an item-identifying number for an item of production, or is a source control reference, a specification or a standard part, type, or similar reference number that is an item-identifying number for an item of supply.
3 – A vendor’s reference (part) number on a source control item, as defined in ASMEY-14.24M and ASMEY-14.100M, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the CODE 3. This code is limited to type 1B or 4B item identification.
8 – A non-item-identifying reference number that is added to a replacement nsn as a result of a cancel-use action on an NSN recorded with ISC 3 or E. It is used to identify the original item of supply/replaced item. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.
9 – A reference number which was the design control reference for the item of supply concept (original design activity) that is now inactive coded reference number category code (RNCC) 3; a specification, standard, or other reference number which is superseded, cancelled, obsolete or discontinued and is coded RNCC 5; a reference number for information only is coded RNCC 6; a drawing which is the single controlling reference number (SCRN) coded RNCC 2 or 7; or a drawing number reference coded RNCC D.

Service or Agency Designator Code (SADC)

A twenty position alpha code designated by the military services or a federal agency that a National Stock Number (NSN) is accepted as a substitute for the item identified by the reference number. A=Army, C=Coast Guard, D=Defense Logistics Agency, F=Air Force, G=General Services Administration, M=Marine Corps, N=Navy, O=Other DOD, T=Federal Aviation Administration, and V=Other Civil Agencies. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 154.

Shelf-Life Code (SLC)

A code indicating the storage time period or perishability of an item. This data is codified by one character which may be an alpha or a numeric. See VOLUME 10, TABLE 50.

Demilitarization Management Special Material Content Code (SMCC)

A one position alphanumeric code that indicates that an item represents or contains peculiar material requiring special treatment, precautions, or management control of the item. In accordance with NAVSUP P-485, VOLUME II, APPENDIX 9, PART V and DOD 4100.39-M, VOLUME 10, TABLE 102.

2 – Electrostatic Discharge (ESD)/Electromagnetic (EM) Sensitive Item
3 – Electrostatic Discharge (ESD)/Sensitive Item
4 – Electromagnetic (EM) Sensitive Item
5 – Hazardous Material (Non-Specified), Items Unique Formulations May Produce Different Hazardous Classes.
6 – Explosives Ordnance Items
7 – Dangerous When Wet Material
8 – Spontaneously Combustible Material
9 – Non-Hazardous Or Non-Sensitive Item, Does Not Require Hazardous Or Special Handling, Packaging Or Precautions
A – Medical Items (Drug/Narcotics/Antibiotics/Medical Kits)
B – Flammable Compressed Gas
C – Corrosive Solids/Corrosive Liquid (Other Than Acid)
D – Alcohol (Ethanol, Ethyl Alcohol, Or Grain Alcohol Only)
E – Precious Metals
F – Flammable Liquids Flash Point Not More Than 60 Degree C (140 Degree F)
G – Combustible Liquids Flash Point 60 Degree C (140 Degree F) To 93 Degree C (200 Degree F))
H – PCB (Item Contains Polychlorinated Biphenyls)
I – Mercury (Not Authorized for Submarine Use)
J – Oxidizing Material
K – Organic Peroxides
L – Other Regulated Materials (O, R, M) Or Class 9 (Miscellaneous Hazardous Materials)
M – Magnetic Material
N – Asbestos (Item Capable of Emitting Asbestos Dust/Fibers)
O – Mercury (Not Authorized for Any Shipboard Use)
P – Poison (Including Methanol, Wood Alcohol, and Denatured Alcohol)
Q – Explosive Non-Ordnance Items
R – Radioactive Material
S – Oils/Petroleum Products (Not Otherwise Specified)
T – Toxic
U – Mercury (Authorized for General Use)
V – Acid (Medical)
W – Nonflammable Compressed Gas
X – Radioactive and Magnetic Material
Y – Non-Magnetic (Must Remain Free of Strong Magnetic Field)
Z – Flammable Solids

Demilitarization Management Special Material Identification Code (SMIC)

A two position alphanumeric code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling. In accordance with NAVSUP P-485, VOLUME II, APPENDIX 14 and DOD 4100.39-M, VOLUME 10, TABLE 60.

Demilitarization Management Source of Supply Code (SOS)

A three position alphanumeric code or routing identifier code (RIC), which identifies the source of supply activity. In accordance with DA PAM 708-2, TABLE 3-37 and DOD 4100.39-M, VOLUME 10, TABLES 59 and 103.

A12 – U.S. Army Soldier Biological & Chemical Command, NATICK, MA 01760
A35 – U.S. Army War Reserve Command, Materiel Management Team, New Cumberland, PA 17070-5008
AKZ – U.S. Army Tank-Automotive and Armaments Command Warren, MI 48397-5000
AP5 – U.S. Army Soldier Biological & Chemical Command, U.S. Army Support Activity, Philadelphia, pa 19101-3460
ARP – Navicp-erp 700 Robbins Avenue Philadelphia, PA 19111-5098
B14 – U.S. Army Armament and Chemical Acquisition and Logistics Activity, Attn: AMSTA-AC, ROCK ISLAND, IL 61299-6000
B16 – U.S. Army Communications-Electronics Command and Fort Monmouth fort Monmouth, NJ 07703-5016
B17 – U.S. Army Aviation & Missile Command (Air), Attn: AMSMI-LC-MM-C, REDSTONE ARSENAL, AL 35898-5230
B56 – U.S. Army Communications Security Logistics Activity, Fort Huachuca, AZ 85613-7090
B63 – U.S.A Biological Depot, Wash, DC Mail – Commanding General, Walter Reed Army Medical Center, Attn: Chief Supply Control Branch, Wash, DC 20012
B64 – U.S. Army Aviation & Missile Command, Attn: AMSMI-LC-MM-C, REDSTONE ARSENAL, AL 35858-5230
B69 – U.S. Army Medical Materiel Agency Frederick, MD 21701-5001
BAM – Simulation, Training and Instrumentation Command Orlando, FL 32826-3276
BS7 – Television-audio Support Activity Sacramento, ca 95813-5019
CAT – Caterpillar Inc, Defense and Federal Products DIV 14009 OLD GALENA ROAD, MOOSVILLE, IL 61552
CLC – Thales Raytheon Systems CO 2000 EAST EL SEGUNDO BLVD EL SEGUNDO, CA 90245-0902
F01 – Lockheed Martin Aeronautical Systems, Marietta, GA 30063-0659
F04 – Air Force Medical Logistics Office AFMLO/FOL FREDERICK, MD 21701-5006
F06 – Lockheed Martin Aeronautical Systems, KEESLER AFB, MS 39534-5249
F08 – Aerospace Integration Corporation, 5555 JOHN GIVENS RD., CRESTVIEW, FL 32539-7019
F09 – Lockheed Martin Mission Systems, Santa Maria 93455-1120
F13 – Pratt & Whitney West Palm Beach Fl 33410-9600
F16 – Rolls Royce Corporation, 2840 Fortune Circle West, Indianapolis IN 42641-5055
F20 – Boeing Integrated Defense System, 4615 s. Oliver, Wichita, KS 67210-3137
F27 – Warner Robins Air Logistics Center, Robins AFB, Georgia 31098-5609
F28 – The Boeing Company 626 Anchors St. NW Fort Walton Beach, Fl 32548-7013
F2U – Warner-robins Air Logistics Center Robins AFB, Georgia 31098-5609
F43 – Honeywell Technical Services, Inc Colorado Springs, Co.
F4U – Ogden Air Logistics Center Hill AFB, Utah 84056-5609
F50 – The Boeing Company C-130 Avionics Mod Program
F52 – ITT SENSOR
F56 – FD9490 SOFSA EMB FOR DEPOT STORAGE ONLY 5749 BRIAR HILL RD Lexington KY 40516-9721
F59 – Northrop Grumman is ACS 2501 Liberty Parkway, Suite 101, Midwest, OK 73110-2885
F63 – Composite Engineering, Inc., 5281 Raley Blvd., Sacramento, CA. 95835-1701
F74 – Northrop Grumman Corporation Warner Robins, GA 31088-7499
F77 – Boeing Military Transport Aircraft, Long Beach CA 90807-3044
F78 – Northrop Grumman Ryan Aero, San Diego CA 92127
F7X – Air Force Cryptologic Support Center (ESC) San Antonio, Texas 78243-5000
F80 – Warner Robins Air Logistics Center Robins AFB, GA 31098-5609
F81 – LOCKHEED MARTIN AERO CO. 2211 New Market Pkwy. S.E., Suite 112 Marietta, GA 30067-9310
F83 – General Atomics-Aeronautical Systems, 16761 Via Del Campo Court, San Diego, CA 92127-1713
F85 – International Telegraph & Telephone 1030 S. Highway A1A, Bldg.989 PO Box 245307, Patrick AFB, FL 32925
F8U – Tinker AFB, Oklahoma 73145-5989
F92 – Air Force Clothing and Textile Office. Philadelphia, Pennsylvania 19101-8419
F97 – HQ Air Force Engineering and Services Center/AFESC. Tyndall AFB, Florida 32403-6001
FG5 – Ogden Air Logistics Center, Hill AFB, Utah 84056-5609
FGL – AF Nuclear Weapons Product Support Center, Kirtland AFB, NM 87117-5617
FGZ – Ogden Air Logistics Center Hill. AFB, Utah 84056-5609
FHZ – Oklahoma City Air Logistics Center. Tinker AFB, Oklahoma 73145-5989
FL5 – Warner Robins Air Logistics Center. Robins AFB, Georgia 31098-5609
FLZ – Warner Robins Air Logistics Center. Robins AFB , Georgia 31098-5609
FMS – Air Force Logistics Command International Logistics Center/MI Wright Patterson. AFB, OH 45433-5001
FND – AFMPC/MPCCM Randolph. AFB, Texas 78148
FNF – AFLC Command Chaplain HQ AFLC/HC Wright-Patterson AFB, Ohio 45433-5001
FPD – Air Force Cryptologic Support Center (ESC) San Antonio, Texas 78243-5000
FPH – Detachment 3, WR-ALC San Antonio, Texas 78241-5603
FPK – San Antonio Air Logistics Center Kelly AFB, Texas 78241-5000
FPZ – San Antonio Air Logistics Center Kelly AFB, Texas 78241-5000
FZZ – WR-ALC/LX, BLDG 350 STRM C, 750 3rd Street, Robins AFB, GA, 31098-2122
G13 – Department of Commerce National Oceanic and Atmospheric Administration National Weather Service – Engineering Division. 1325 EAST-WEST HIGHWAY W/OSO322, SSMC2 SILVER SPRING MD 20910
G14 – National Weather Service National Reconditioning Center (NRC) 1520 E. BANNISTER ROAD KANSAS CITY, MO 64131
G36 – Veterans Administration Supply Depot (901E) P.O. BOX 27 HINES, IL 60141
G69 – Department of Transportation Federal Aviation Administration, ATTN: AAC-490 P.O. BOX 25082 OKLAHOMA CITY, OK 73125
GF0 – General Services Administration General Products Commodity Center Fort Worth, TX 76102
GGE – General Services Administration Automated Data And Telecommunications Services Electronic Service Division (WCE). 7th & D Streets, SW Washington, D.C. 20407
GK0 – General Services Administration Tools Material Management Division. Kansas City, MO 64131
GN0 – General Services Administration Office Of Supplies And Paper Products Commodity Center, New York, NY 10278
GQ0 – General Services Administration Office And Scientific Equipment Commodity Center, Washington, D.C. 20406
GSA – General Services Administration. Washington, D.C. 20406
GT0 – General Services Administration Prints And Chemicals Commodity Center Auburn, Washington 98002
GV0 – General Services Administration Furniture Commodity Center, Washington, D.C. 20406
H9A – Special Operations Forces SPT ACTY, Bldg 221 Blue Grass Station, 5751 Briar Hill Road, Lexington, KY 40512-4063
HAD – Field Command, Defense Special Weapons Agency, Kirtland AFB, New Mexico 87117-5669.
HAM – HQ USSOCOM/SOAL-LM 700 Tampa Point Blvd, MACDILL AFB FL 33621-5323
HGD – Honeywell Federal Manufacturing And Technologies, Kansas City, MO
HM8 – Defense Supply Center Richmond (Mapping), Richmond, VA 23297-5335
HQA – Joint Strike Fighter Program Office, Crystal Gateway 4, 200 12th St Ste 600, Arlington, VA, 22203.
JCA – Authorization And Procurement Purposes (Integrated Materiel Manager (IMM)/Service)
JCD – Delete
JCK – Condemned
JCL – Local Manufacture – Fabricate Or Assembly (DLA/service)
JCM – Depot Manufacture – Fabricate Or Assembly (Service, Except Air Force)
JCR – Reference To Phrase (Service)
JDC – Commercial (DLA)
JDF – Defense Fuel Supply Center (DFSC) Distribution Plan/Contact Bulletin And Special Procurement Programs
JDS – DLA Supply Schedule
JSB – Schedule of Blind-Made Products (Service)
JSC – Commercial (Service)
JSP – Federal Prison Industries (Service)
JSY – Local Purchase U3A, Appendix A, Aircraft Spares Only.
JVC – Commercial (VA)
JVS – Federal Supply Schedule/Decentralized Schedule (VA)
L01 – Coastal Systems Station Dahlgren Division Naval Surface Warfare Center Panama City, FL 32407-7001
L05 – BAE Systems Marine LTD, LANS BLDG C-08, BARROW-IN-FURNESS, Cambria England LA14 1AF
L46 – Zodiac of North America Inc., Attn: Jackie Dolch Tel. 410 -643-4141, 540 Thompson Creek Road, Stevensville, MD 21666
LA1 – Federal Prison Industries, FC1 ESTILL 100 PRISON RD ESTILL SC 29918-0699
LA2 – Track International Prime Contractor, 369 W Western Ave Port Washington WI 53074-0990
LA3 – Terex Cranes Inc Conway Operation, PO Box 260002 Conway SC 29528-6002
LA4 – Litton Electro Optics Systems Div, Attn: US Marine Corps 12024 Forrestgate Drive, Dallas TX 75243-5411
LA5 – Hayes Diversified Technologies. 10844 E AVE, SUITE A1 HESPERIA CA 92345-5000
LA6 – Advanced Vehicle Systems Inc. 600 NEW HAMPSHIRE AVE NW SUITE 1000 WASHINGTON DC 20037-2485
LA9 – Oshkosh Truck Corporation. PO BOX 2566 2225 MINNESOTA ST OSHKOSH WI 54902-7021
LB2 – Lion-Vallen Industries. 6450 POE AVE STE 300 DAYTON, OH 45414-2646
LB3 – Isometrics Inc, 1266 N Scales St. PO Box 660, Rockingham County, Reidsville, NC 26320-8306
LB4 – Navistar International Corporation Truck Ohio Plant, 6125 Urbana Rd. PO Box 600, Springfield, OH 45501-0600
LB7 – Ingersoll Rand, MF M67854 01 L 3086, 501 Sandford Ave, Mocksville NC 27028-2919
LB8 – Elgin Sweeper Company Subsidiary Of Federal Signal Corps 1300 West Bartlett Road Elgin IL 60120-7429
LC1 – XR Aytheon CO Hanger Facility Bldg 11005 BIGGS ARMY AIRFIELD EL PASO TX 79916-0001
LC2 – Ingersoll-rand Equipment And Services Co 12311 West Silver Spring Drive, Milwaukee, WI 53225
LC3 – Kalyn Siebert, 1505 West Main Street, P.O. Box 1078, Gatesville, TX 76528-6078
LC5 – General Dynamics Amphibious Systems Facility Code 07lt9 14041 Worth Avenue Woodbridge VA 22192-4123
LC6 – Raytheon Company PO BOX 801 McKinney, TX 75070-0801
LC7 – United Defense LP Ground System Division P.O. Box 15512 York, PA 17405-1512
LC8 – Caterpillar Inc Defense Federal Products TC A 14009 Old Galenda Rd. Mossville, IL 61552-0470
LC9 – Am General PO Box 728 408 South Byrkit St Mishawaka, IN 46544-0728
LD2 – Aerovironment, 69 Moreland Rd, Simi Valley, CA 93065-1662
LD3 – RO Sefense Inc., 48 Rawls Spring Loop Rd, Hattiesburg, MS 39402-7801
LD4 – Nordic Air, Inc. 5455 Route 307 West Geneva, OH 44041
LD6 – Harris Corp GCSD, 2400 Palm Bay Rd NE, Palm Bay FL 32905-3399
LD9 – Gyrocam Systems LLC, 8100 15th Street East, Sarasota, Fl 34243
M00 – Raytheon Systems Company L00682, 2501 West University Drive, P.O. Box 801 M/S 8064, McKinney TX 7570-0801
M01 – Trak International Prime Contractor 369 W Western Ave Port Washington WI 53074-0990
M05 – Bae Systems Marine Ltd, Lans Bldg M05c-08, Barrow-In-Furness, Cambria England LA 141AF
M20 – United Defense LP ground Systems Div 1100 Bairs Rd, P.O. Box 15512 York, PA 17405-1512
M31 – Caterpillar Inc, Defense Federal Products TCA, 14009 Old Galena Rd, Mossville, IL 61522-0407
M32 – Lion-vallen Industries 6450 Poe Ave Ste 300 Dayton, OH 45414-2646
MA6 – Advanced Vehicle Systems Inc, l00864 600 NW Hampshire Ave, NW, Ste 1000, Washington, DC 20037
MA7 – Hayes Diversified Technologies l00679, 10844 E Ave Ste A1, Hesperia, CA 92345
MA8 – AM General L00211, P.O. Box 728, 420 South Byrkit St. Mishawaka, IN 46522-3012
MA9 – Oshkosh Truck Company, Oshkosh, WI 54901
MHQ – Headquarters Marine Corps. Washington, D.C. 20380
MPB – Commanding general marine corps logistics base g647-1, bldg. 3700 Albany, Georgia 31704-5000
MTC – American Crane Corporation DBA Terex American Inc 202 Raleigh St Wilmington, NC 28412-6363
N17 – Navy Resale And Service Support Office Fort Wadsworth Staten island, NY 10305
N21 – Naval Air System Command, Washington, D.C. 20360
N22 – Naval Supply Systems Command. Washington, D.C. 20376
N23 – Naval Sea Systems Command. Washington, D.C. 20362
N24 – Naval Sea Systems Command. Washington, D.C. 20362
N25 – Naval Facilities Engineering Command. Alexandria, Virginia 22332
N26 – Bureau of Naval Personnel. Washington, D.C. 20370
N32 – Naval Inventory Control Point. Philadelphia, Pennsylvania 19111-5098
N35 – Naval Inventory Control Point. Mechanicsburg, Pennsylvania 17055-0788
N39 – Military Sealift Command. Washington, D.C. 20390
N43 – Navy Food Service Systems Office. Washington Navy Yard. Washington, D.C. 20374
N44 – Strategic Systems Project Office. Washington, D.C. 20376
N45 – Naval Training System Center. Orlando, Florida 32813
N47 – Navy Fleet Material Support Office. Mechanicsburg, PA 17055
N48 – Naval Education And Training Program Development Center. Pensacola, Florida 32509
N56 – Bureau Of Medicine And Surgery. Washington, D.C. 20390
N57 – Chief of Naval Operations. Washington, D.C. 20350
N64 – Commander Naval Intelligence Command. 4600 Silver Hill Road Washington, D.C. 20389
N67 – Naval Air Technical Services Facility. Philadelphia, Pennsylvania 19111
N68 – Naval Underwater Systems Center. Newport, RI 02840
N77 – Space And Naval Warfare Systems Command. Washington, D.C. 20363
N79 – Naval mine engineering facility. Yorktown, Virginia 23491
N84 – Naval Ship Weapon Systems Engineering Station (Code 5200). Port Hueneme, California 93041
NCB – Naval ordnance center P.O. Box 2011 Mechanicsburg, Pennsylvania 17055-0788
NDZ – Naval supply center san Diego, California 92131
NFZ – Naval publications and forms directorate naval inventory control point Philadelphia, Pennsylvania 19111-5098
NMP – Naval inventory control point P.O. Box 2020 Mechanicsburg, PA 17055-0788
NMZ – Naval inventory control point P.O. Box 2020 Mechanicsburg, PA 17055-0788
NRP – NAVICP-ERP 700 Robbins Avenue Philadelphia, PA 19111-5098
NWS – National Weather Service. 1325 East West Highway W/Goso322 Silver Spring, MD 20910
P64 – Crane Division Naval Surface Warfare Center Code 1121, Building 41se, 300 Highway 361 Crave, IN 47522-5010
P73 – Naval Undersea Warfare Engineering Station Supply Department. Keyport, WA 98345
P87 – Naval Surface Warfare Center Coastal Systems Station. 6703 w. Highway 98 Code SP40, Building 435 Panama City, FL 32407-7001
PPZ – Naval Air Station Supply Department. Pensacola, Florida 32508
PRZ – Naval Air Warfare Center, Aircraft Division Supply Department Patuxent River, MD 20670-5588
PSZ – Pacific Missile Test Center. Poit Mugu, California 93042
Q1G – NAVAL ICP, Philadelphia, PA 19111
Q1J – NAVAL ICP, Philadelphia, PA 19111
Q6D – Communications Security Material System 3801 Nebraska Ave N.W. Washington, D.C. 20390
Q81 – Joint Cruise Missile Project Office. Washington, D.C. 20360
R29 – SSPO Technical Representative (SSPOTR) Sperry Rand Corp. Sperry Systems Management Division Great Neck, New York 11020
R31 – Naval Plant Representative (SPL(W)) P.O. BOX 504 Sunnyvale, California 94088
R32 – Naval Ship Engineering Center Naval Station, Norfolk, Virginia 23511
R33 – Naval Plant Technical Representative (SPA). AUTONETICS Division of Rockwell international, Inc. Anaheim, California 92803
R41 – Commanding Officer Naval Construction Battalion Center Civil Engineer Support Office Code 15324 Port Hueneme, California 93043-5000
R48 – Naval Supply Systems Command, Arlington, VA 22241-5360
R58 – Navy Recruiting Command, Arlington, Virginia 22203
RAZ – Naval Plant Representative (SPL-60) Lockheed Missile and Space CO. P.O. Box 504 Sunnyvale, California 94088
RCZ – Naval Plant Representative (SPG). General Electric Ordnance Systems. Pittsfield, Massachusetts 01201
RKZ – Naval Plant Technical Representative (SPI) Interstate Electronics Corp. Anaheim, California 92803
RTF – SPAWAR SYSCEN, Charleston. P.O Box 190022. North Charleston, SC 29419-9002
S9C – Defense Supply Center Columbus, Ohio 43215
S9E – Defense Supply Center Columbus, Columbus, OH 43218
S9F – Defense Fuel Supply Center Cameron station Alexandria, VA 22314
S9G – Defense Supply Center Richmond, Virginia 23297
S9I – Defense Industrial Supply Center. Philadelphia, Pennsylvania 19111
S9M – Defense Supply Center Philadelphia Directorate of Medical Materiel. Philadelphia, Pennsylvania 19111
S9P – Defense Supply Center Philadelphia Perishable Subsistence. Philadelphia, Pennsylvania 19101
S9R – Defense Supply Center Richmond, Richmond, Virginia 23297
S9S – Defense Supply Center Philadelphia Nonperishable Subsistence Philadelphia, Pennsylvania 19101
S9T – Defense Supply Center Philadelphia, Philadelphia, Pennsylvania 19101
SMS – Defense Logistics Agency, Enterprise Business Systems
ZIC – U.S. Coast Guard Supply Center Curtis Bay, Baltimore, Maryland 21226-1792
ZNC – Commanding Officer, USCG Surface Force Logistics Center, Code 028, MIL STOP 25, 2401 Hawkins Point Road, Baltimore, Maryland 21226-5000
ZQC – Commanding Officer, Department of Homeland Security, USCG Aviation Logistics Center, 1664 Weeksville Road, Elizabeth City, NC 27909

Using Service Code (SVC)

A one position alpha code used to differentiate the catalog management data between services, integrated materiel manager, lead service, and civil agencies. In accordance with DOD 4100.39-M, VOLUME 10, TABLE 39.

A – U.S. Army
B – Federal Aviation Administration
C – U.S. Coast Guard
D – Lead Service (Military Service Activity) – 06 (Consumable)
F – U.S. Air Force
G – General Services Administration (Civil Agencies)
I – Integrated Materiel Manager
L – Lead Service – 22 (Repairable)
M – U.S. Marine Corps
N – U.S. NAVY
V – Veterans Administration (Civil Agencies)
W – National Weather Service
X – Abbreviated Segment H

Type of Business Code

A code utilized in the Cage File that defines the disadvantaged status of a business.

H – Approved by Small Business Administration (SBA) for Section 8 Program.
I – Other Disadvantaged small business firm.
N – Not a disadvantaged small business firm.

Unit of Issue Code (UI): A code indicating the physical measurement, the count or when neither is applicable, the container, or shape of an item for purposes of requisitioning by, and issue to, the end-user, and is that element of management data to which the unit price is ascribed. See DOD 4100.39-M, VOLUME 10, TABLE 53 – UNIT OF ISSUE CODES.

About Saitech

Post Category

Recent Posts

Explore Our Products